HYDROPOOL
HOME OF THE SELF CLEANING SALT WATER HOT TUB

Why not spend your leisure time enjoying your hot tub, instead of maintaining it?

Automatic bromine generation for hot tubs and spas just took a giant step forward. The Genesis brand automatic bromine generator is the smartest, safest, easiest and most cost effective way to keep your spa safe and sparkling clear! Hot tubs maintained by a Genesis system are virtually maintenance free and use fewer chemicals. The technology, while taking years to develop, is easy to understand, easy to use and is totally hands free. Make Your Spa Fun Again!

How does the technology work?

First, sodium bromide (“NaBr” - a close relative to sodium chlorine - “NaCl” - otherwise known as table salt) is added to your spa’s water. The dissolved bromide ions are circulated through a bromine generating contact cell located in your spa plumbing. This converts the bromide ions into free bromine (bromine is the recommended sanitizer for hot tubs and spas) before reverting back to sodium bromide --- thus completing the perpetual cycle. Additional sodium bromide is only added when your water level declines due to splash out, or when you drain and refill the tub.

The system’s electrodes are comprised of high density, ultra-porous “graphite”. The controller operates at extremely low DC voltages, resulting in the electrical cost of operation at just pennies a day.

Synthetic graphite is utilized in the revolutionary electrode cell, providing a surface area far greater than available with metal electrodes. The GENESIS electrode is made up of 2 of these unique and powerful plates. The plates measure 1 inch wide by 8 inches long and 1/2 inch thick. The electrodes are virtually impervious to harsh chemicals and the oxidation process. Still, over time, the flow of water will erode the replaceable cell. The cell carries a full five year warranty.

What are the benefits of going to Salt Water Technology?

1) Eliminate Quarterly Draining – With the Genesis, your water change interval can be extended up to a full year. The reason you currently have to drain your spa every three months is because the total dissolved solids (TDS) in your water increases every time you add chemicals. When the TDS gets too high, your chemicals will not work effectively and you must replace with fresh water. With the Genesis Generator, there is no more buildup of tablet by-products (like the glues and binders used to hold bromine & chlorine tablets together) because the Genesis generates pure bromine.
2) Eliminate Regular Shocking - The biggest reason you currently shock your water is to burn off by-products created by your sanitizer. Since these will not be present when using the Genesis system, most shocking will not be necessary. If you have a hot tub party and the bather load increases, you can use a non-chlorine shock to increase the bromine level. Alternatively, you can turn up the dial on the Genesis system when the bather load is higher than normal.
3) Reduce Foaming - Chemical by-products are a big contributor to foaming in your spa. Because the Genesis system eliminates sanitizer by-products, you will notice a drastic decrease in the amount of foam in your spa.
4) Eliminate Scum Lines - Scum lines are usually caused by inconsistent sanitizer levels. Floaters will dispense more bromine when they are full of pucks than when they are almost empty. As well, your bromine pucks will not be effective if you miss a regular shock treatment. (These inconsistencies cause scum lines to form.) With the Genesis system, once you set the dial on the control system, you will have consistent bromine generation.
5) Reduce Chemical Odours

See the Clarity...Feel the Difference!!!
Call 1888 798 tubs